All web applications and frameworks need some mechanism for mapping the URL that a user enters in the browser to the code that should be executed when the server receives the request. Different languages and frameworks take different approaches to this. In PHP- or CGI-based systems, the URL represents a path on the hard disk to the file that should be executed. In Zope, URLs are treated as paths in an object hierarchy, and in Django, URLs are matched to code based on regular expressions.
Pylons doesn’t use any of these approaches. Instead, it uses a very powerful and flexible system called Routes, which is an improved version of the Ruby on Rails routing system. Routes allows you to quickly and easily specify how groups of similar URLs map to your controllers; in turn, this allows you to create whatever URL structure you prefer for your application. Unlike other lookup systems, the URL is completely decoupled from the code that handles it. This also makes it easier to change your URL structure if you need to do so.
You’ve already seen Routes in action in previous chapters. For example, in Chapter 3 you saw a route that looked like this:
map.connect('/{controller}/{action}/{id}')
Each of the labels between curly brackets represents dynamic parts of a route. When a route is matched, the corresponding URL parts are matched, and their values are assigned to routing variables corresponding to the labels of the dynamic parts within the curly brackets. In this way, the one route can be used to match a large range of URLs.
You can also use Routes to generate URLs with h.url_for(). To do this, you need to import the Routes url_for() function into your project’s lib/helpers.py file:
from routes import url_for
Here’s an example of how to use h.url_for(), which results in the URL /page/view/1 being generated:
h.url_for(controller='page', action='view', id=1)
As you can see, the arguments to h.url_for() correspond to the routing variable names used when defining the route.
When a user visits this URL, the same route used for generating the URL will also be used for matching it. In this case, the URL generated by the earlier call to h.url_for() will also generate the routing variables controller='page', action='view', and id=1 when the URL is visited, and this results in the page controller’s view() action being called with the ID 1.
You can also give individual routes a name by specifying a string as the first argument to map.connect(). This reduces the amount of typing you have to do when generating URLs. For example, you might define this route:
map.connect('blog_entry', '/blog/view/{id}')
You could then generate a URL to the entry with ID 1 like this:
h.url_for('blog_entry', id=1)
Now that you have a rough feel for how Routes works, let’s dive in straightaway and look at how Routes is set up and used in Pylons and how Pylons uses information from Routes to dispatch requests.
Caution
One problem with Routes is that because it was originally ported from the Ruby on Rails implementation, it still contains a number of features that you might have used when developing a Pylons 0.9.6 project that are no longer considered good practice. In the section “Unnecessary Routes Features” later in this chapter, I’ll explain why these features are no longer recommended. It is likely they will be removed in a future version of Routes, so it is important you avoid using them.
At its heart Routes is all about two things: analyzing a URL to produce a list of variables and being able to re-generate that URL from the same variables. These variables are known as routing variables, and they are used by Pylons to determine which controller action should be called and the arguments it should be called with. The URL matching is done by comparing the URL to a series of strings known as route paths, which, together with a set of options, define how a particular set of URLs can be turned into routing variables and back to URLs again. The route paths and options together are known as a route, and a set of routes is known as a route map.
Let’s see how these concepts are applied in a Pylons application. You can find your project’s route map in its config/routing.py file. Let’s use the SimpleSite route map as an example. It looks like this:
def make_map():
"""Create, configure and return the routes Mapper"""
map = Mapper(directory=config['pylons.paths']['controllers'],
always_scan=config['debug'])
map.minimization = False
# The ErrorController route (handles 404/500 error pages); it should
# likely stay at the top, ensuring it can always be resolved
map.connect('/error/{action}', controller='error')
map.connect('/error/{action}/{id}', controller='error')
# CUSTOM ROUTES HERE
map.connect('/{controller}/{action}')
map.connect('/{controller}/{action}/{id}')
return map
Here you can see that the make_map() function is responsible for creating a route map object called map and returning it. The routes are added to the map via the map.connect() function, which takes a route path such as '/{controller}/{action}/{id}' and some optional arguments called the route options. Each of the labels for the dynamic parts between the { and } characters specify the positions of routing variables that are matched against any value in the corresponding position within a URL. When a URL is entered, Pylons tries to match it by calling map.match(url). Routes then searches each of the routes in the route map from top to bottom until it finds a route that matches the URL. Because matching is done from top to bottom, you are always advised to put your custom routes below the ones that Pylons provides to ensure you don’t accidentally interfere with the default behavior of Pylons. More generally speaking, you should always put your most general routes at the bottom of the route map so that they don’t accidentally get matched before a more specific route lower down in the route map.
To demonstrate the behavior of the route map as it stands, let’s consider some example URLs and the routing variables that are produced when the URL is matched. Let’s start with the site root URL, which is /:
URL: /
Result: None
As you can see, there are no routes with just one / character in them, so the URL / is not currently matched. If you visited this URL, you would see the index.html file served from your project’s public directory or a 404 Not Found error page. You’ll add a route to handle the root URL in the second part of the SimpleSite tutorial in Chapter 14.
URL: /page/view/1
Result: {'action': 'view', 'controller': 'page', 'id': '1'}
As you already know from having tested the SimpleSite application in Chapter 8, this URL is matched by the last route in the route map and results in a page being displayed. The URL fragment page is matched to {controller}, view is matched to {action}, and 1 is matched to {id}.
Now consider the URL /error/img:
URL: /error/img/logo.png
Result: {'action': 'img', 'controller': 'error', 'id': 'logo.png'}
This is matched by the second route, map.connect('/error/{action}', controller='error'), because the first part of the URL begins with /error/. The img part is matched to {action}, and logo.png is matched to {id}. Notice that the route path doesn’t contain a {controller} part, though, so you might wonder how the controller routing variable gets assigned a value. You’ll see in the route map that the error route definition also takes a default argument of controller='error'. This means that if the route is matched, the controller routing variable will be automatically added to the results with a value of 'error'. You’ll learn about how Pylons uses this route in its internal handling of error documents in Chapter 19.
So far, this should all seem fairly intuitive; URLs are matched against static text or dynamic parts representing routing variables in the route path, and default values can be added when needed. Let’s try another example:
URL: /section/view/1
Result: None
This time the URL isn’t matched even though at first glance it looks like it should be. To understand why, you need to know a little bit more about how Routes works.
The Mapper object takes a number of arguments, including the following:
Pylons uses the Routes default controller_scan() function, which will scan the directory specified by the directory argument to check for controllers. If a particular route matches a URL but the controller resulting from the match doesn’t exist, the route will be ignored, and the next route will be tried. In this case, the directory argument is set to config['pylons.paths']['controllers'], which contains the path to your project’s controllers directory. Since no section controller exists yet, the route in the previous example didn’t match. For production use, you don’t need to have Routes scan the controller directory on each match because the controllers aren’t likely to change, so the always_scan variable is automatically set to the same value as the value of the debug option in the config file, enabling the scan in development mode and disabling it in production mode.
Note
You are very unlikely to want to customize the controller_scan() function in your own application, but I’ve mentioned it here so that you are aware of its behavior when you see it crop up in some of the examples in this chapter.
By carefully defining routes and specifying their order in the route map, it is possible to quickly and easily map quite complex URL structures into simple sets of routing variables that can be used in your application. Before you go on to look at the details of how to write your own routes, let’s take a brief look at how Pylons uses the routing variables to call a particular controller action.
Once a URL has been matched against a route and the controller has been verified to exist, Pylons checks to see whether it can find the action.
Pylons is set up so that any controller methods that start with an _ character are not considered actions at all and cannot be called as a result of a URL dispatch. If the action specified in the routing variables doesn’t exist or it starts with an _ character, then the check fails. In debug mode for development, this raises an exception to explain the mistake; in production mode, it simply results in a 404 Not Found error page being displayed.
If the controller and action both exist, then Pylons looks for a __before__() method attached to the controller class. If the method exists, it is executed. The __before__() method can therefore be used to set up per-request objects or perform other processing to be carried out before each action in the controller is called.
Next, Pylons inspects the action to see what arguments it takes and calls it in such a way that any arguments that have the same names as the routing variables are called with the value of the routing variable as the argument. Here are some examples:
# No routing variables used in the action
def no_routing_variables(self):
return 'No routing variables used'
# Populate the ``id`` with the value of the ``id`` routing variable
def id_present(self, id):
return 'The id is %s' % id
Tip
You’ve already seen routing variables being used in this way in the page controller from the SimpleSite tutorial in Chapter 8, and you’ll recall from Chapter 3 that you can also retrieve the controller name and action in the same way. All the routing variables that are passed to the action are also automatically added as attributes to the template context global c.
In addition to routing variables, you can also specify both environ and start_response as arguments in your actions. The environ argument will get populated with the same WSGI environment dictionary you can access via the Pylons request global as request.environ, and the start_response() callable is a WSGI callable you’ll learn about in Chapter 16. Both environ and start_response get added as attributes to the template context global c in the same way as the routing variables do if you use them in an action. To see all these features in action, consider the following example. When the test() action is called, the browser will display True, True, True, True:
def __before__(self, id):
c.id_set_in_before = id
def test(self, environ, start_response, controller, id):
w = c.id_set_in_before == id
x = c.environ == environ == request.environ
y = c.start_response == start_response
z = c.controller == controller
request.content_type = 'text/plain'
return "%s %s, %s, %s"%(w, x, y, z)
After an action is called, Pylons looks for an __after__() method attached to the controller, and if it exists, it is called too. You can use __after__() for performing any cleanup of objects you created in the __before__() method.
Both the __before__() and __after__() methods can also accept any of the routing variable names as arguments in exactly the same way as the controller action can.
Of course, there are occasions where it is useful to be able to access the routing variables outside your controller code. All the routing variables are available in the request.urlvars dictionary and are also available in request.environ["wsgiorg.routing_args"].
Now that you have seen some examples of routes being matched against URLs and understand how Pylons uses the routing variables to dispatch to your controller actions, it is time to learn the details of how you can construct individual routes.
As you’ve already seen, a route is specified by arguments to map.connect() that include a route path and a number of options. The route path itself can consist of a number of different types of parts between / characters:
To demonstrate the different types of route parts, consider the following URL:
/wiki/page/view/some/variable/depth/file.html
and a route path to match it, which includes a wildcard part:
/wiki/{controller}/{action}/*url
In this case, wiki is treated as a static part, and page is a dynamic part that is assigned to the controller route variable. In Routes, / characters separating dynamic or wildcard parts are not treated as static parts, so the next / is ignored. view is a dynamic part assigned to the action route variable. The following / is also ignored, and the whole of the rest of the URL is considered a wildcard part and assigned to the url route variable.
Any URL starting with /wiki/ followed by two sets of characters, each followed by a / character, will be matched by this route path as long as the controller exists.
Let’s test this with a simple example. Rather than modifying the SimpleSite project, you can set up your own route map directly. You just have to specify a dummy controller_scan function to return a list of valid controllers. In the example, map.minimization is set to False so that the route map is set up in the same way it would be in a Pylons application. The controller_scan() function will just return ['error', 'page'] to simulate that only the page and error controllers exist. Here’s what the route map looks like:
>>> def controller_scan(directory=None):
>>> return ['error', 'page']
...
>>> from routes import Mapper
>>> map = Mapper(controller_scan=controller_scan)
>>> map.minimization = False
>>> map.connect('/wiki/{controller}/{action}/*url')
>>> print map.match('/wiki/page/view/some/variable/depth/file.html')
{'action': u'view', 'url': u'some/variable/depth/file.html', 'controller': u'page'}
The URL is matched as expected. Let’s try to match some different URLs:
>>> print map.match('/some/other/url')
None
>>> print map.match('/wiki/folder/view/some/variable/depth/file.html')
None
Notice that if the URL doesn’t match or if the matched controller doesn’t exist, the route is not matched, and the map.match() function returns None.
The Pylons implementation of Routes doesn’t require the dynamic and wildcard portions of the route path to be separated by a / character. Here you’re using a . character as a separator. Note that you need to create a new Mapper to set this new route because you have already called map.connect() on the previous one. Once again, you use the dummy controller_scan() function and set map.minimization = False to turn off minimization in the same way as the Pylons setup:
>>> map = Mapper(controller_scan=controller_scan)
>>> map.minimization = False
>>> map.connect('/blog/{controller}.{action}.*url')
>>> print map.match('/blog/page.view.some/variable/depth/file.html')
{'action': u'view', 'url': u'some/variable/depth/file.html', 'controller': u'page'}
As these examples have demonstrated, you can think of wildcard parts as being very much like dynamic parts but also matching / characters.
Although wildcard parts are a powerful tool, they generally aren’t used very often and can be a sign that you haven’t designed your routes very well. The risk is that because they match any character including /, they will match very many URLs. If you were to have a wildcard route near the top of your route map, it could easily match URLs for which there was a more specific route later in the route map. The vast majority of the time you will just use static and dynamic parts in your route paths, but if you do use wildcard routes, they should always be placed near the bottom of the route map to avoid them accidentally matching URLs when there is a more specific route later in the map.
These are three cases when you might choose to use wildcard routes:
- When an entire portion of the URL is going to be passed to another application (for example, Paste’s static file server)
- When you are trying to match a string ID that might include / characters
- When you want to pass the entire request URL to a particular action to handle an error condition, rather than allowing a 404 Not Found error page to be returned
With the knowledge you’ve already gained, you will be able to create most of the routes you are likely to need, but there is one problem. Every route matched must result in at least the routing variables controller and action being assigned a value, but URLs such as / don’t contain enough characters to be able to deduce the controller and action names from them.
To solve this problem, Routes allows you to specify default values for any routing variables as part of the routing map’s connect() function. You’ve already seen default variables in action during the discussion of Pylons’ error route, but let’s look at another example:
>>> map = Mapper(controller_scan=controller_scan)
>>> map.minimization = False
>>> map.connect('/archives/by_eon/{century}', controller='page', action='list')
In this example, the controller and action both have default values, so they are called default variables. You’ll notice that you can’t create a URL that will affect the value of the controller and action variables since they aren’t present in the route path, so their default values of 'page' and 'list' will always be used. Such variables are known as hard-coded variables.
The value assigned to the century routing variable will depend on the URL with which it is matched:
>>> print map.match('/archives/by_eon/')
None
>>> print map.match('/archives/by_eon')
None
>>> print map.match('/archives/by_eon/1800')
{'action': u'list', 'controller': u'page', 'century': u'1800'}
Caution
One thing you have to be aware of when choosing names for routing arguments is that the map.connect() method also accepts certain keyword arguments including requirement, _explicit, _encoding, and _filter. If you choose a routing variable with the same name as one of these arguments, then you will not be able to specify a default value because Routes will not interpret the argument as a default value. To prevent this potential problem, future versions of Routes will not allow any routing variable names starting with an _ character, so you would be wise to avoid starting your routing variables with an _.
You should avoid using two other names as routing variables; these are the WSGI objects environ and start_response. Both can be passed automatically to controller actions when they are called. If you choose routing variables with the same names as these, you won’t be able to access the routing variables as arguments to the controller actions because the Pylons dispatch mechanism will assume you want the WSGI objects themselves rather than the routing variables of the same name.
It is possible to take the use of default variables to an extreme. A route where the controller and action are hard-coded is known as an explicit route. Here’s an example:
map.connect('/blog/view/1', controller='blog', action='view', id=1)
Here the whole route path is made only from static parts, and all the routing variables are hard-coded as default variables. The benefit of this approach is that only one URL will ever match this route, but the drawback is that defining all your URLs this way requires adding an awful lot of routes to your application.
Now that you have seen how Pylons uses Routes and you understand the details of how URLs are matched, you can turn your attention once again to how to generate URLs.
Routes includes two functions for use in your web application that you will find yourself using frequently:
- h.url_for()
- redirect_to()
You’ve already seen the h.url_for() function a few times, and you’ll recall that to make it available in your controllers and templates, you need to import it into your project’s lib/helpers.py file from the routes module.
The redirect_to() function is automatically imported into your controllers from the pylons.controllers.util module. It is used to redirect a controller to a different URL within your application. If you look at the page controller in the SimpleSite project you’ve been developing, you’ll see that up to now redirects have been coded manually by specifying the correct HTTP status code for a redirect and setting a Location HTTP header using the response global. Here’s the save() action as an example:
@restrict('POST')
@validate(schema=NewPageForm(), form='edit')
def save(self, id=None):
page_q = meta.Session.query(model.Page)
page = page_q.filter_by(id=id).first()
if page is None:
abort(404)
for k,v in self.form_result.items():
if getattr(page, k) != v:
setattr(page, k, v)
meta.Session.commit()
session['flash'] = 'Page successfully updated.'
session.save()
# Issue an HTTP redirect
response.status_int = 302
response.headers['location'] = h.url_for(controller='page', action='view',
id=page.id)
return "Moved temporarily"
You could instead replace the last five lines to use redirect_to() like this:
# Issue an HTTP redirect
return redirect_to(controller='page', action='view', id=page.id)
As you can see, this is much neater, so it is a good idea to use redirect_to() in your controllers rather than writing out the long version of the code. redirect_to() is commonly used after a form submission to redirect to another URL so that if the user clicks Refresh, the form data isn’t sent again.
One of the major benefits of using h.url_for() and redirect_to() rather than generating your own URLs manually is that Pylons can automatically take account of the URL at which your application is deployed and adjust the URLs automatically.
As an example, imagine you have created a new Pylons project to manage application forms. You might choose to deploy the Pylons application at a URL such as /forms so that it appears to be part of an existing site. This means that when a user visits /forms, the Pylons application needs to know that they are really requesting a URL, which would be / if the Pylons application was running on a stand-alone server. This also means that any time the application creates a URL, it has to start /forms; otherwise, the links wouldn’t point to the Pylons application. In this setup, the SCRIPT_NAME environment variable would be set to /forms so Pylons can work out that the URLs needed to be adjusted. Any time you call any of the Pylons URL generation functions, the URL generated is modified to take account of the SCRIPT_NAME environment variable, so all the URLs get generated correctly without needing any manual modification.
If you are regularly using the same route in your application, it can quickly become tedious to type all the routing variables every time you want to use h.url_for(). This is where named routes come in. A named route is like an ordinary route, but you access it directly via a name.
Here’s an example:
map.connect('category_home', 'category/{section}', controller='blog', action='view',
section='home')
Then in your Pylons application you might use this:
h.url_for('category_home')
This is equivalent to generating the URL using the routing variables in full, both generate the URL /category/home:
h.url_for(controller='blog', action='view', section='home')
As you can see, this saves a bit of typing. You can also specify keyword arguments, and it will override defaults associated with the route name. The following:
h.url_for('category_home', section='admin')
generates the URL /category/admin and is equivalent to this:
h.url_for(controller='blog', action='view', section='admin')
Routes also supports a feature called static named routes. These are routes that do not involve actual URL generation but instead allow you to quickly alias common URLs that are external to your site. To make a route static, you add _static=True as an argument. For example, if your route map contained this:
map.connect('google_search', 'http://www.google.com/search', _static=True)
you could now reference http://www.google.com/search by typing this in your application:
h.url_for('google_search')
This is especially useful if you are accessing resources throughout your application that you think might change because it means you have to change the URL in only one place. Static named routes are ignored entirely when matching a URL.
You can also use h.url_for() to reference static resources in your project’s public directory. Routes will automatically prepend the URL you give it with the proper SCRIPT_NAME so that even if you are running your Pylons application under a different URL, the correct URL will be generated. For example, if your Pylons application was mounted at /forms and you used this in your application, the URL /forms/css/source.css would be correctly generated with this code:
h.url_for('/css/source.css')
For portable web applications, it’s highly encouraged that you use h.url_for() for all your URLs, even those that are static resources and images. This will ensure that the URLs are properly handled in any of the possible deployment setups you could use for your application.
Now that you’ve seen some of the ways you can use Routes to match and generate URLs, let’s take a look at what actually makes a good URL structure.
First here’s a definition of the parts of a URL:
http://jimmyg.org:80/some/url#fragment?foo=bar
|--| |---------|--|--------|--------|------|
| | | | | |
scheme | port | fragment |
domain name path info query string
Now here are some tips:
An obvious URL is a great URL. If a user can glance at a link in an email and know what it contains, you have done your job. This means choosing URL parts that accurately describe what is contained at that level of the URL structure. It’s usually better to use a descriptive word rather than an ID in the URL wherever possible. For example, if you were designing a blog, you should try to use apr instead of 04 to represent April, and you should use the name of a category rather than its ID if that is appropriate. Choosing URLs that describe their content makes your application intuitive to your users and gives search engines a better chance of accurately ranking the page.
Tip
Edward Cutrell and Zhiwei Guan from Microsoft Research conducted an eye-tracking study of search engine use that found people spend 24 percent of their “gaze time” looking at the URLs in the search results. If your URLs accurately describe their content, users can make a better guess about whether your content is relevant to them.
Any piece of content should have one and only one definitive URL, with any alternatives acting as a permanent redirect. In the past, features such as Apache’s DirectoryIndex have meant that if you entered a URL that resolved to a folder, the default document for that folder would be served. This means that two URLs would exist for one resource. To make matters worse, servers are often configured so that http://www.example.com/someresource and http://example.com/someresource both point to the same resource. This means there can easily be four URLs for the same resource.
There are three good reasons why this is bad:
The only time you might want to have more than one URL for the same resource is if all but one of the URLs redirects to the other one so that users of your site who have already bookmarked links can still find them.
Navigation links, sidebars, and tabs are all well and good, but if you have a good URL structure, your users should be able to navigate your site by changing parts of the URL. There are a few rules about how best to do this:
The most important tip is that you should use common sense when designing a URL structure. Don’t apply any of the tips too rigidly; after all, you know your application and your users’ requirements, so you can use your judgment about what will work best for you.
Because Routes was originally ported from the Ruby on Rails version, a few “features” have been added that in hindsight aren’t necessary and are best to disable. In the following sections, you’ll look at these features, what they do, and how to disable them.
Note
It is highly likely that all these features will be completely removed in a future release of Routes.
Previous versions of Pylons had a feature called route minimization enabled by default. Route minimization allowed you to specify optional default variables for a particular route. To demonstrate route minimization, let’s look at the previous example again but this time with minimization enabled and with an optional default variable, century:
>>> map = Mapper(controller_scan=controller_scan)
>>> map.minimization = True
>>> map.connect('/archives/by_eon/{century}', controller='page',
... action='aggregate', century=1800)
>>> print map.match('/archives/by_eon/')
{'action': u'aggregate', 'controller': u'page', 'century': u'1800'}
>>> print map.match('/archives/by_eon')
{'action': u'aggregate', 'controller': u'page', 'century': u'1800'}
>>> print map.match('/archives/by_eon/1800')
{'action': u'aggregate', 'controller': u'page', 'century': u'1800'}
Notice this time that all three URLs result in a match, even though two of them don’t have a part of the URL that could correspond to the century dynamic part. This is because with minimization enabled, Routes assumes you want to use the optional default variables automatically if they aren’t specified in the URL.
Here are some of the reasons why route minimization is a bad idea:
- It means multiple URLs serve the same page, which as explained earlier is bad for caches and search engine rankings.
- It makes it difficult to choose which URL should be generated for a particular action when using h.url_for(), so Routes always generates the shortest URL with minimization enabled.
- Complex routes and many defaults can make it hard to predict which route will be matched.
It is recommended that you leave route minimization disabled by keeping map.minimization set to False at the top of your route map.
One feature of Routes that was designed to make your life as a developer easier was called route memory. When your controller and action are matched from the URL, the routing variables that are set get remembered for the rest of that request. This means that when you are using h.url_for(), you actually only need to specify routing variables, that are different from the ones matched in the current request.
Consider this route:
map.connect('/archives/{year}/{month}/{day}', controller='page', action='view')
If the URL /archives/2008/10/4 was entered, this route would match the following variables:
{'controller': 'page', 'action': 'view', 'year': '2008', 'month': '10', 'day': '4'}
With these routing variables matched, h.url_for() would generate the following results:
h.url_for(day=6) # => /page/2008/10/6
h.url_for(month=4) # => /page/2008/4/4
h.url_for(year=2009) # => /page/2009/10/4
The majority of times you use h.url_for() will be in view templates. Since the same template is often called from multiple different controllers and actions, you can’t always rely on h.url_for() generating the same URL in the same template, and this can introduce unexpected bugs, so it is usually much better to specify all your routing arguments explicitly.
There is another problem with route memory. Consider a route map set up with the following routes:
map.connect('/{controller}/{action}')
map.connect('/{controller}/{action}/{id}')
With route memory enabled, let’s imagine someone visited the URL /page/view/1. Here are the routing variables that would be matched:
{'controller': 'page', 'action': 'view', 'id': '1'}
Now try to work out which URL would be generated with this code:
h.url_for(controller='page', action='new')
The result is /page/new/1 even though the new() action might not take an id argument. This means that in order to have this matched by the first route to generate the URL /page/new, you would have to explicitly specify id=None like this:
h.url_for(controller='page', action='new', id=None)
You may not have noticed, but this is exactly what you did in the footer for the SimpleSite view.html template in Chapter 8. If route memory was disabled globally, you would not have had to specify id=None for the new(), list(), or delete() action routes.
As well as explicitly setting a routing variable to None, you can also disable route memory on a per-call basis by specifying the controller starting with a / character. For example:
h.url_for(controller='/page', action='new')
This is not ideal either, though. To avoid this complication, it is highly recommended that you disable route memory completely and always specify all arguments to h.url_for() explicitly. You can do this by passing explicit=True to the Mapper() constructor in your project’s config/routing.py. This will ensure route memory isn’t used, and you will have to explicitly specify each routing variable in every call to h.url_for():
map = Mapper(directory=config['pylons.paths']['controllers'],
always_scan=config['debug'], explicit=True)
If you should choose not to disable the route memory feature, you should be aware that it works only with h.url_for() and not with its counterpart redirect_to().
Routes has a surprising legacy feature that means that if you don’t specify a controller and an action for a particular route, the implicit defaults of controller='content' and action='index' will be used for you. This can be demonstrated very simply:
>>> map = Mapper(controller_scan=controller_scan)
>>> map.minimization = False
>>> map.connect('/archives/')
>>> print map.match('/archives/')
{'action': u'index', 'controller': u'content'}
It is highly unlikely you want Routes to make up action and controller variables for you, so it’s strongly recommended that you disable this feature. You can do this by passing _explicit=True as an argument to the individual routes you want implicit defaults to be disabled for:
>>> map = Mapper(controller_scan=controller_scan)
>>> map.minimization = False
>>> map.connect('/archives/', _explicit=True)
>>> print map.match('/archives/')
None
In reality, it is likely you will want these implicit defaults disabled for all your routes. Luckily, the explicit=True option you passed to the Mapper() object to disable route memory also disables implicit defaults, which is another reason to use it.
With route minimization, route memory, and implicit defaults disabled, the way you use Routes in your application might be quite different from the way you used it in previous versions of Pylons. To demonstrate this, let’s look at an old routing structure that you might have used in Pylons 0.9.6:
>>> map = Mapper(controller_scan=controller_scan)
>>> map.minimize = True
>>> map.connect(':controller/:action/:id', controller='blog', action='view', id=1)
Here minimization is enabled as well as implicit routes and route memory. Look how many different URLs match the same controller, action, and ID. This clearly breaks the URL disambiguation rule listed earlier in the “Choosing Good URLs” section:
>>> print map.match('/blog/view/1/')
{'action': u'view', 'controller': u'blog', 'id': u'1'}
>>> print map.match('/blog/view/1')
{'action': u'view', 'controller': u'blog', 'id': u'1'}
>>> print map.match('/blog/view/')
{'action': u'view', 'controller': u'blog', 'id': u'1'}
>>> print map.match('/blog/view')
{'action': u'view', 'controller': u'blog', 'id': u'1'}
>>> print map.match('/blog/')
{'action': u'view', 'controller': u'blog', 'id': u'1'}
>>> print map.match('/blog')
{'action': u'view', 'controller': u'blog', 'id': u'1'}
>>> print map.match('/')
{'action': u'view', 'controller': u'blog', 'id': u'1'}
With route minimization, route memory, and implicit defaults disabled, you would have to add the following routes to achieve the same effect:
>>> map = Mapper(controller_scan=controller_scan, explicit=True)
>>> map.minimize = False
>>> map.connect('/', controller='blog', action='view', id=1)
>>> map.connect('/{controller}', action='view', id=1)
>>> map.connect('/{controller}/', action='view', id=1)
>>> map.connect('/{controller}/{action}', id=1)
>>> map.connect('/{controller}/{action}/', id=1)
>>> map.connect('/{controller}/{action}/{id}')
>>> map.connect('/{controller}/{action}/{id}/')
Of course, as has been mentioned, it is generally a bad idea to have more than one URL map to the same resource, so you are unlikely to want to do this in most applications. Even if you did want to do this, the explicit approach requires a lot more typing, but it is also much clearer what is happening. Although using explicit routes can sometimes mean more typing, being explicit about what you expect to happen makes life much easier when you have more complicated route setups.
Disabling route memory, implicit defaults, and route minimization also requires you to do more work when generating URLs, but once again, this will prevent you from finding obscure URL generation problems later in a project. To generate the URL to view the blog post with ID 1 and with the explicit argument set to True, you would always have to type the following, no matter which routing variables were generated for the request that calls the code:
h.url_for(controller='blog', action='view', id=1)
This would generate the URL / because this is the first route to match. Since routes are matched from top to bottom, if you wanted this to generate the URL /blog/view/1 instead you could move the second-to-last route to the top so that it was matched first. This would affect the way URLs were generated for other controllers too, though:
>>> map = Mapper(controller_scan=controller_scan, explicit=True)
>>> map.minimize = False
>>> map.connect('/{controller}/{action}/{id}')
>>> map.connect('/', controller='blog', action='view', id=1)
>>> map.connect('/{controller}', action='view', id=1)
>>> map.connect('/{controller}/', action='view', id=1)
>>> map.connect('/{controller}/{action}', id=1)
>>> map.connect('/{controller}/{action}/', id=1)
>>> map.connect('/{controller}/{action}/{id}/')
Alternatively, you could add an explicit route as the first route. You’ll remember from the discussion of default variables earlier in the chapter that an explicit route matches only one URL:
>>> map = Mapper(controller_scan=controller_scan, explicit=True)
>>> map.minimize = False
>>> map.connect('/blog/view/1', controller='blog', action='view', id=1)
>>> map.connect('/', controller='blog', action='view', id=1)
>>> map.connect('/{controller}', action='view', id=1)
>>> map.connect('/{controller}/', action='view', id=1)
>>> map.connect('/{controller}/{action}', id=1)
>>> map.connect('/{controller}/{action}/', id=1)
>>> map.connect('/{controller}/{action}/{id}')
>>> map.connect('/{controller}/{action}/{id}/')
Some people would argue that you should always specify the controller and action for every URL as hard-coded default variables using an explicit or named route. There are some other advantages to this approach:
- Temporarily blocking access to a particular controller can be difficult with nonexplicit routes because it isn’t always obvious whether another route you have specified will also resolve the URL to the controller. If you have named or explicit routes, you can just comment out the routes that point at the controller in question, and you’re all set.
- Imagine you have a Pylons application that is a couple of years old and has an established group of users who have bookmarked various parts of your site. If you were to refactor the application, moving controllers around or putting certain actions in different controllers, you would find it difficult to maintain the existing URL structure if you were using implicit routes. With explicit or named routes, you could simply update where the URL pointed to so that the old URLs would still work.
I hope what is clear from the discussion in this section is that you should always set explicit=True in your Mapper to disable route memory and implicit defaults and that you should disable route minimization with map.minimization=False, but it is up to you whether you choose to go further and be even more explicit about your routes with hard-coded defaults for the controller and action or named routes.
Only you can decide whether ordinary, explicit, or named routes are the correct choice for your application. Ordinary routes that use the “convention over configuration” philosophy don’t result in disambiguated URLs. Named and explicit routes give you complete control over how your URLs are generated but are more effort to set up. The nice thing about Routes is, of course, that you can use all three techniques together.
It is now time to learn about some of the really advanced features of Routes that, when used effectively, can very much simplify your route maps or enable your Pylons application to deal with any number of complex legacy URL structures you might have inherited from an old application.
Any route you specify can have a requirement argument specified as a keyword to the map’s connect() method. The requirement argument should be a dictionary of routing variable names for any dynamic or wildcard parts and a corresponding regular expression to match their values against. Regular expressions are documented in the Python documentation for the re module. Any valid Python regular expression can be used.
Here’s an example:
map.connect('archives/{year}/{month}/{day}', controller='archives', action='view',
year=2004,requirements={'year': '\d{2,4}', 'month': '\d{1,2}'})
One particularly useful regular expression used in the previous example is \d, which matches a digit. In this case, the year can be either two or four digits long, and the month can be one or two digits long.
Here’s another example; this time we are ensuring the theme is one of the allowed themes:
theme_map = 'admin|home|members|system'
map.connect('users/{theme}/edit', controller='users',
requirements={'theme': theme_map})
Conditions specify a set of special conditions that must be met for the route to be accepted as a valid match for the URL. The conditions argument must always be a dictionary and can accept three different keys:
These three types of conditions can all be used together in the same route by specifying each argument to the conditions dictionary, but I’ll discuss them each in turn.
Let’s deal with the method option first. This allows you to match a URL based on the HTTP method the request was made with. One problem with testing examples using the method condition is that the match depends on information from the WSGI environment, which is usually set during a request. Since there isn’t a real HTTP request for this test code, you have to emulate it, so in the following examples you set map.environ with fake environment information to test how the matching works. Obviously, you wouldn’t do this in your own code. The example also sets up a new controller_scan() function which only accepts the value user for the controller:
>>> from routes import Mapper
>>> def controller_scan(directory=None):
>>> return ['user']
...
>>> map = Mapper(controller_scan=controller_scan)
>>> map.minimization = False
>>> map.connect('/user/new/preview', controller='user', action='preview',
... conditions=dict(method=['POST']))
>>> # The method to be either GET or HEAD
>>> map.connect('/user/list', controller='user', action='list',
... conditions=dict(method=['GET', 'HEAD']))
>>> map.environ = {'REQUEST_METHOD':'POST'}
>>> print map.match('/user/new/preview')
{'action': u'preview', 'controller': u'user'}
>>> print map.match('/user/list')
None
>>> map.environ = {'REQUEST_METHOD':'GET'}
>>> print map.match('/user/new/preview')
None
>>> print map.match('/user/list')
{'action': u'list', 'controller': u'user'}
As you can see, the method condition works as expected, allowing the routes to match only when the request contains the correct request method.
Now let’s look at the function condition. This condition is extremely powerful because it effectively allows you to write custom code to extend Routes’ functionality. The function can return True to indicate the route matches or False if it doesn’t. The function also has full access to the WSGI environment and the dictionary of routing variables, which have already been matched, so the function is free to modify or add to them as well.
Here’s an example of a function that extracts the action to be called from the X-ACTION HTTP header in the request and compares it to allowed values:
from webob import Request
def get_action(environ, result):
# Create a Pylons-style request object from the environment for
# easier manipulation
req = Request(environ)
action = req.GET.get('X-ACTION')
if action in ['call', 'get', 'view']:
result['action'] = action
return True
return False
You wouldn’t often design this sort of functionality into your routes if you were creating your own application from scratch, but having such low-level access to the underlying details of the request is very powerful and can be useful when writing a Pylons application to replace legacy code.
Here is another use that might be useful in your application, this time to treat the referrer as an ordinary routing variable:
def referals(environ, result):
result['referer'] = environ.get('HTTP_REFERER')
return True
You could use this function in a route like this to add the referrer to the matched routing variables:
map.connect('/{controller}/{action}/{id}', conditions=dict(function=referals))
Now let’s think about subdomains. These are easiest to demonstrate with examples, and once again you have to create a fake HTTP request environment for your examples to emulate requests coming from different subdomains.
First let’s set up the map object. Notice that you specify map.sub_domains=True to enable subdomain support:
>>> from routes import Mapper
>>> def controller_scan(directory=None):
... return ['user']
...
>>> map = Mapper(controller_scan=controller_scan)
>>> map.minimization = False
>>> map.sub_domains = True
Now let’s set up two routes. The first will accept any subdomain and produce an action routing variable with a value any, and the second will accept only the subdomains foo and bar and will produce an action routing variable certain:
>>> map.connect('/user/any', controller='user', action='any',
... conditions={'sub_domain':True})
>>> map.connect('/user/certain', controller='user', action='certain',
... conditions={'sub_domain': ['foo', 'bar']})
Now let’s attempt some matches, emulating different requests by setting different environ dictionaries. First let’s emulate a domain foo.example.com and test two URLs. The first will test what happens when sub_domain is set to True, and the second will test what happens when it is restricted to ['foo', 'bar']:
>>> map.environ = {'HTTP_HOST':'foo.example.com'}
>>> print map.match('/user/any')
{'action': u'any', 'controller': u'user', 'sub_domain': 'foo'}
>>> print map.match('/user/certain')
{'action': u'certain', 'controller': u'user', 'sub_domain': 'foo'}
As you can see, both the routes match because foo is a valid subdomain for either condition. Notice how 'sub_domain': 'foo' is added to the matched routing variables.
Now let’s try the domain not.example.com:
>>> map.environ = {'HTTP_HOST':'not.example.com'}
>>> print map.match('/user/any')
{'action': u'any', 'controller': u'user', 'sub_domain': 'not'}
>>> print map.match('/user/certain')
None
This time, since not is not one of the allowed domains for the second route, only the first example works. Let’s see what happens if no subdomain is specified in the request:
>>> map.environ = {'HTTP_HOST':'example.com'}
>>> print map.match('/user/any')
None
>>> print map.match('/user/certain')
None
As you can see, neither of the routes matches.
Caution
To be able to use matching based on subdomain, you must set the map’s sub_domains attribute to True. Otherwise, none of the routes checking the subdomain conditions will match.
To avoid matching common aliases to your main domain like www, the subdomain support can be set to ignore certain specified subdomains. Here’s an example:
>>> from routes import Mapper
>>> def controller_scan(directory=None):
... return ['user']
...
>>> map = Mapper(controller_scan=controller_scan)
>>> map.minimization = False
>>> # Remember to turn on sub-domain support
... map.sub_domains = True
>>> # Ignore the ``www`` sub-domain
... map.sub_domains_ignore = ['www']
>>> map.connect('/user/any', controller='user', action='any',
... conditions=dict(sub_domain=True))
>>> map.connect('/user/certain', controller='user', action='certain',
... conditions=dict(sub_domain=['www', 'foo']))
>>> map.environ = {'HTTP_HOST':'foo.example.com'}
>>> print map.match('/user/any')
{'action': u'any', 'controller': u'user', 'sub_domain': 'foo'}
>>> print map.match('/user/certain')
{'action': u'certain', 'controller': u'user', 'sub_domain': 'foo'}
>>> map.environ = {'HTTP_HOST':'www.example.com'}
>>> print map.match('/user/any')
None
>>> print map.match('/user/certain')
None
You can see that requests to the www subdomain are not matched even if one of the conditions specifies that the subdomain www should be matched. Now let’s look at how h.url_for() handles subdomains.
When subdomain support is on, the h.url_for() function will accept a sub_domain keyword argument. Routes then ensures that the generated URL has the subdomain indicated. For example:
h.url_for(controller='user', action='certain', sub_domain='foo')
would generate the following URL but it will only work during a Pylons request, not from the interactive Python session we’ve been using so far in this chapter:
http://foo.example.com/user/certain
Named routes can have functions associated with them that will operate on the arguments used during generation. Filter functions don’t work with implicit or explicit routes because the filter function itself can affect the route that actually gets chosen, so the only way to be explicit about which route to use is to specify it with a name.
To highlight the problem filter functions solve, consider this route:
map.connect('/archives/{year}/{month}/{day}', controller='archives',
action='view', year=2008,
requirements=dict(year='\d{2,4}', month='\d{1,2}'))
Generating a URL for this will require a month and day argument and a year argument if you don’t want to use 2008. Imagine this route links to a story and that your model has a story object with year, month, and day attributes. You could generate a URL for the story like this:
h.url_for(year=story.year, month=story.month, day=story.day)
This isn’t terribly convenient and can be brittle if for some reason you need to change the story object’s interface. It would be useful to be able to pass the story object directly to h.url_for() and have Routes extract the information it requires automatically. You can do this with a filter function.
Here’s what the filter function for the story object might look like:
def story_expand(result):
# Only alter args if a story keyword arg is present
if 'story' not in result:
return result
story = result.pop('story')
result['year'] = story.year
result['month'] = story.month
result['day'] = story.day
return result
You can then create a named route with a _filter argument like this:
m.connect('archives', '/archives/{year}/{month}/{day}',
controller='archives', action='view', year=2004,
requirements=dict(year='\d{2,4}', month='\d{1,2}'),
_filter=story_expand)
This filter function will be used when using the named route archives. If a story keyword argument is present, it will use that and alter the keyword arguments used to generate the actual route.
If you have a story object with those attributes, you would now be able to generate a URL like this:
h.url_for('archives', story=my_story)
As well as making it substantially easier to generate the URL, you can also easily change how the arguments are pulled out of the story object simply by changing the filter function if the story object interface were ever to change.
Although filter functions can be very powerful, you might decide against using them in your application because they can also make it less obvious what is happening to generate your URLs.
You’ve now seen all the main features of Routes and how you can take advantage of them to perform some very complex URL mappings as simply as possible or to integrate with legacy systems. You also saw how some of Routes legacy features such as route minimization, route memory, and implicit defaults can cause problems you might not have expected, and you now know how to avoid using these features in your application. Although route minimization is disabled by default in new Pylons applications, route memory and implicit defaults are not, so it is recommended you set explicit=True as an argument to Mapper() in your project’s config/routing.py file.
In Chapter 14, you’ll look at Routes again to see how you can use its features to improve the SimpleSite application.